Products

SenSpot Wireless 1D/3D Vibration

SenSpot is designed to operate maintenance-free for decades. After installation, SenSpot does not need
calibration, battery replacement, or any other maintenance during its service life. Due to small size and light-
weight, adhesive-mount SenSpot sensors can be applied easily to as many critical spots on a structure as
needed, with minimal installation effort. SenSpot accelerometer can be used on different elements of a
structure to monitor vibration. Whenever the change of acceleration in any direction exceeds the defined
threshold, in other words, when it detects a vibration event, the SenSpot starts sampling and transmitting the
acceleration values in all directions.

Read More
Inquiry Now Download Product PDF

SenSpot is designed to operate maintenance-free for decades. After installation, SenSpot does not need
calibration, battery replacement, or any other maintenance during its service life. Due to small size and light-
weight, adhesive-mount SenSpot sensors can be applied easily to as many critical spots on a structure as
needed, with minimal installation effort. SenSpot accelerometer can be used on different elements of a
structure to monitor vibration. Whenever the change of acceleration in any direction exceeds the defined
threshold, in other words, when it detects a vibration event, the SenSpot starts sampling and transmitting the
acceleration values in all directions.

  • Long lifetime (battery life of 10 years)
  • Wireless communication (IEEE 802.15.4)
  • Lightweight, 215 grams (7.6 ounce)
  • Easy mounting
  • Self-adhesive, no drilling is required (e.g.,steel)
  • Flange-mount, drilling is required (e.g., concrete)
  • Quick installation, 1-2 minutes
  • Adjustable sampling interval: can be adjustedby user from 50 to 500 samples per second (Thelower range is customizable).
  • Adjustable sensitivity threshold: can be adjusted by user from 8mg to 512mg.
  • Number of samples per triggered event: two option                                                                                                         short waveform: 1024 samples                                                                                                                                     Long waveform: 4096 samples
  • Full range: ±8g (“g” is the acceleration of gravity)

  • Resolution:62.5 µg

  • Noise Level: X & Y & Z Direction: 25 µg/√Hz

  • Work Temperature: -40°C to +125°C (−40°F to +150°F)

  • Shock Survival: 5000 g, 0.1 s, no damage to the electronics.

  • Communication Range: 300 m (980 ft) for reliable communication.

  • Small Size: 59 mm (2.32") × 64.9 mm (2.56") × 35 mm (1.38")

  • Power Source: CR123 battery (non-rechargeable Lithium Manganese Dioxide)

  • Ingress Protection: IP67, waterproof. Survives short-term submersion.

  • Bridge health monitoring
  • General structural integrity monitoring (buildings, dams, tunnels, levies, etc.)
  • Seismic monitoring
  • Detection of vehicular or barge collision against
  • bridge piers fender systems

Copyright © Chir-Ayu Controls Pvt Ltd 2026. All rights reserved.

Created by: Odmantis Pvt Ltd