This test is performed for measuring the shrinkage of cylindrical specimens under constant loads at different time intervals. The apparatus consists of a load frame designed to apply and maintain the required load on the specimen. The initial compression is applied by a portable hydraulic jack. The load maintaining element is a series of springs preloaded by the hydraulic jack.
The apparatus is supplied complete with hand pump, two 200 mm diameter precision gauges (one permanently connected, the other for loading) and a hydraulic jack.
The typical application of this apparatus is for research purposes.
We are at your disposal for all information you may need.
Maximum load: 300 kN
Vertical testing space: 1650 mm
Compression platens: 165 mm diameter. The upper platen is spherically seated.
Hydraulic jack: 300 kN capacity
Hand pump with precision Bourdon gauge 200 mm diameter
Bourdon gauge 200 mm diameter permanently connected
Frame dimensions: 450 mm diameter x 2680 mm height
Weight: 300 kg (approx.)
|
Code
|
Description
|
Qty
|
|
82-P9008
|
DATALOG 8, 8 channels multipurpose data logger
|
|
|
82-P9008/ ELT
|
Set of 4 connecting cable
|
|
|
82-P9008/ SOF
|
Data aquisition software
|
|
|
82-P0398
|
Electrical compensation device
|
I
|
|
82-P0393 *
|
Strain gauges, 60mm lenght. Pack of 10.
|
|
|
82-P0399/C
|
Strain gauge application kit.
|
I
|
|
82-P0399/1
|
connecting terminals, 50 pairs
|
1
|
|
55-0O235/LC
|
Upgrade of the 55-0O235/A creep tester with a 300kN load cell for digital acquisition of the axial load
|
1 (as opt)
|
55-C0235/A
300kN capacity load frame for creep test.
82-P0396
Strain gauge 120mm gauge length. (Pack of 10)
82-P0393
Strain gauge 60 mm gauge length. (Pack of 10)
82-P0398
Compensation device for up to 4 Wheatstone bridges with 1/4 or 1/2 bridge setup
82-P0399/C
Strain gauge application kit including: conditioner, neutralizer, acetone, tweezers, adhesive with catalyst agent, 100 m of bipolar cable, solder, soldering iron, scalpels, scissors, duct tape, sellotape, sandpaper and carrying case.
82-P0399/1
Connecting terminals. 50 pair’s sheet
82-P9008/ELT
Set of four cables for connecting load cells, pressure transducers, strain gauges, LDT / LVDT / potentiometric type displacement transducers to DATALOG 8 (82-P9008) and GEODATALOG 8 ( 30-WF6008)
82-P9008/SOF
DATACOMM 2 data acquisition software and LAN cable for PC connection of DATALOG 8 (82-P9008, P9008/F) - Up to 8 data logger (total 64 channels) can be connected to a single PC creating a modular network (LAN hub is required)
82-P9008
DATALOG 8, 8 channels standalone multipurpose data logger. 110-230V / 50-60Hz / 1 Ph.
55-C0235/LC
Upgrade of the 55-C0235/A creep tester with a 300kN load cell for digital acquisition of the axial load. Data logger system not included.
